On This Page
Saudization at a Glance
Three connected checks give employers a practical starting point:
| What to check | Why it matters | Where to verify |
|---|---|---|
| Nitaqat classification | The establishment's position depends on its economic activity, workforce and the applicable calculation. | Qiwa establishment records and MHRSD's current Nitaqat calculator |
| Occupation-specific rules | Some covered professions have additional localization targets, wage thresholds or accreditation conditions. | The applicable ministerial decision and procedural guide |
| Eligible Saudi employees | A payroll headcount alone does not establish counting weight; contracts, wages and special conditions matter. | Qiwa contract status, GOSI contributory wage and applicable rules |
Start With the Establishment, Not a Generic Ratio
Confirm the correct government entity, current classification and relevant occupation codes before estimating how many Saudi employees may be required.
1. Understand the Two Layers of Saudization
The first layer is Nitaqat, which classifies private-sector establishments according to their localization position. Developed Nitaqat uses the applicable economic activity, workforce and programme calculation to determine the establishment's band.
The second layer consists of ministerial decisions localizing particular occupational groups. These may introduce separate percentages, wage requirements or professional-accreditation conditions for specific roles.
An establishment must consider both. Meeting a general Nitaqat requirement does not automatically mean every covered occupation-specific decision has also been satisfied.
2. Check the Establishment's Current Nitaqat Position
The Developed Nitaqat programme has five bands: Red, Low Green, Medium Green, High Green and Platinum. The applicable thresholds are not the same for all economic activities or workforce sizes.
MHRSD launched a further three-year phase beginning in 2026. Workforce planning should use the current phase and the actual government entity's records, rather than a threshold reproduced from an older article or a single branch's informal staff list.
- Identify the establishment's registered economic activity and the entity used for Nitaqat calculation.
- Check its present classification and the eligible Saudi-worker weight recorded in the official systems.
- Use the MHRSD Developed Nitaqat calculator for workforce scenarios. The new-phase calculator is intended for entities with six or more workers.
- Check the applicable procedural guide and the year of the planned workforce change.
- Confirm the establishment's eligibility for any relevant government employment service directly, rather than inferring it from a colour band alone.
The programme's entity-level scope may cover more than one branch under the relevant definitions. A department's or worksite's staff count is not necessarily the same as the government count.
3. Confirm Which Saudi Employees Count
For ordinary full-time employees, counting depends on the wage subject to GOSI contributions and other applicable requirements. MHRSD made electronically documented employment contracts through Qiwa an essential condition for Saudi employees to count in Nitaqat, effective 15 April 2026.
The rules in force as of 1 November 2026 are summarized below. These are the general Nitaqat wage weights, not the minimum salary legally required for every job.
| Monthly GOSI contributory wage | General Nitaqat weight — November 2026 | Important qualification |
|---|---|---|
| Below SAR 3,000 | Not counted | Subject to the applicable published rules and any special case. |
| SAR 3,000 to below SAR 4,000 | Half of one Saudi employee | Check the employment category and all other conditions. |
| SAR 4,000 or above | One Saudi employee | Qiwa contract documentation and applicable conditions still apply. |
Announced Nitaqat Wage-Threshold Changes
On 25 October 2026, Saudi authorities announced that the general wage threshold for counting a Saudi employee fully under Nitaqat will rise in two stages. These announced future dates matter for workforce planning now, even though the higher thresholds are not yet in force.
| Period | General wage threshold for full Nitaqat counting | Status on 1 November 2026 |
|---|---|---|
| Until 24 April 2027 | SAR 4,000 per month | Current general full-counting threshold |
| From 25 April 2027 | SAR 5,000 per month | Announced future phase 1 |
| From 25 April 2028 | SAR 6,000 per month | Announced future phase 2 |
This is a change to the wage threshold for full Saudization counting. It is not, by itself, a rule requiring every private-sector employer to pay every Saudi employee SAR 6,000. Separate wage rules for specific professions may be higher. The treatment of wages below the future full-counting thresholds should be confirmed against the detailed rules in force at the relevant time; do not assume that the current partial-counting bands will remain unchanged.
2027–2028 Planning Consideration
Employees who count fully under the general SAR 4,000 threshold in November 2026 should not automatically be assumed to retain full weight after the announced April 2027 and April 2028 changes. Model the employer-cost impact and verify the applicable rules before each phase.
4. Apply Profession-Specific Localization Rules
Some groups of occupations have their own localization decisions in addition to the general Nitaqat programme. Check the exact Saudi occupational classification, rather than relying only on the company's internal job title.
For example, the updated engineering-professions decision requires 30% localization in the specified engineering roles for establishments employing five or more workers in those covered professions. It became effective on 30 June 2026 and targets 46 engineering professions.
For covered Saudi engineering employees to count under that engineering decision, the published conditions include a GOSI contributory wage of at least SAR 8,000 and the required professional accreditation from the Saudi Council of Engineers.
The engineering decision must not be confused with the separate decision governing engineering technical occupations, which has a different scope and wage requirement. Neither rule should be generalized across all jobs or all businesses.
- Match each planned job to the occupation code and current localization decision.
- Check the percentage, covered role count and effective date of the decision.
- Check any occupational minimum wage and professional-accreditation requirements.
- Recheck updates before a new hiring campaign, transfer or renewal.
5. Model the Effect of Workforce Changes
Additional non-Saudi hires can reduce the simple proportion of Saudi employees in a workforce; eligible Saudi hires can increase it. This example illustrates the arithmetic only. It is not the official Nitaqat formula, an official band assessment or an occupation-specific calculation.
| Illustrative workforce scenario | Saudi workers | Non-Saudi workers | Simple Saudi share |
|---|---|---|---|
| Starting team | 10 | 30 | 25.0% |
| After adding 10 non-Saudi workers | 10 | 40 | 20.0% |
| After adding 5 eligible Saudi workers | 15 | 40 | 27.3% |
Nitaqat may calculate a different result because its programme uses entity-level information, employee weights, economic-activity thresholds and the current phase. The wage changes announced for 2027 and 2028 may also affect whether existing Saudi workers are counted fully in future workforce scenarios.
There is no universal rule that one Saudi employee "covers" ten non-Saudi employees. Use official systems to determine the actual establishment requirements.
6. Review EOR, Outsourcing and Ajeer Arrangements Carefully
An EOR, PEO or outsourced service arrangement can change who is the legal employer, who supervises particular work and which establishment holds employment records. A commercial service label alone does not establish where localization counts.
MHRSD's rules for outsourcing non-Saudi labour services through Ajeer, effective 25 January 2026, regulate the arrangements and documentation for covered service contracts between establishments. They should not be treated as a blanket permission to transfer localization obligations or employee-counting weight between different entities.
Do not assume that Saudi employees of a service provider automatically improve the client's own Nitaqat position. Do not assume that a client has no compliance obligations merely because non-Saudi workers are supplied by another company. Review the contractual model, Ajeer permits, worksite arrangements and official employer records for the actual case.
Employment Structure Is Not the Same as Localization Counting
Check both: (1) whether the contractual work arrangement is permitted and properly documented, and (2) how the actual workers are treated in the official localization systems.
7. Build a Practical Saudization Plan
Saudization works best when integrated into recruitment, budgeting and workforce operations rather than addressed after hiring commitments are made.
- Maintain an accurate workforce list showing legal employer/entity, occupation codes, nationality, work locations and planned start dates.
- Record the current Nitaqat classification and use the official calculator to test planned headcount changes.
- Verify Qiwa contract documentation and GOSI wages for Saudi employees included in the counting plan.
- Review profession-specific decisions, professional registration and any additional wage threshold.
- Budget for the announced full-counting thresholds of SAR 5,000 from April 2027 and SAR 6,000 from April 2028; do not rely on SAR 4,000 indefinitely.
- Review transfers, overseas hires, outsourcing arrangements and departures before they affect compliance.
- Assign responsibility for updating contracts, social-insurance data and regulatory checks.
- Verify the latest official rules and the establishment's live status before material workforce changes.
A sound plan links hiring forecasts and employer costs to reliable regulatory information. A current official assessment is more useful than any generalized published percentage.
Frequently Asked Questions
Does every Saudi company have the same Saudization percentage?
No. Nitaqat depends on the establishment's economic activity, workforce and applicable calculation. Separate decisions may also apply to particular professions.
Does a Saudi employee earning SAR 4,000 count fully under Nitaqat?
Under the general rules in force in November 2026, SAR 4,000 is the full-counting wage threshold, subject to Qiwa contract documentation and other applicable conditions. The announced general thresholds increase to SAR 5,000 from 25 April 2027 and SAR 6,000 from 25 April 2028.
Does the announced SAR 6,000 threshold mean every Saudi salary must be raised to SAR 6,000?
No. The announcement concerns the wage needed for a Saudi employee to count fully under Nitaqat; it is not, by itself, a universal salary mandate. Employers must still comply with any other wage rules that apply to particular occupations or arrangements.
Why does Qiwa employment-contract documentation matter?
MHRSD made Qiwa electronic contract documentation an essential requirement for counting Saudi employees in Nitaqat from 15 April 2026. Employers should verify the documented contract in the official system.
Does the 30% engineering rule apply to every business?
No. It applies to the specified covered engineering occupations and establishments within the decision's scope, including those employing five or more workers in the covered engineering roles. Check the relevant occupational codes, SAR 8,000 wage requirement and professional accreditation.
Can one Saudi employee cover ten non-Saudi employees?
No fixed one-to-ten rule applies to every establishment. The actual requirement depends on the business activity, relevant headcount, Saudi-employee weights, current Nitaqat thresholds and occupation-specific decisions.
Does hiring more non-Saudi employees automatically change our Nitaqat band?
It may affect the applicable calculation, but the result cannot be determined from one headcount change alone. Review the official entity-level data and run the current calculator.
Can an EOR or outsourcing company meet the client's Saudization requirement?
Do not assume the provider's Saudi employees count for the client. Confirm the actual legal employment arrangement, Ajeer documentation where applicable, official records and the applicable Nitaqat treatment.
Where should employers verify current and future Saudization rules?
Use Qiwa and MHRSD's current Nitaqat calculator for the establishment, review the 2026 Developed Nitaqat guide and the latest occupation-specific decisions, and monitor official announcements before the 2027 and 2028 wage phases take effect.
Official Resources
These are official Saudi government references. Dates and details should be checked again before publishing new legal or regulatory information.
